Pico Macom's TSMS-2150X Series rack-mounted satellite multiswitches can be used in every SMATV application requiring satellite 950-2150MHz IF distribution. The easy mount enclosure and all rear panel connections provide for rack mounting or quick and easy wall mounting by simply turning the unit face to the wall. The TSMS-2150X-8AUV allows 2 LNB inputs and 1 off-air antenna input (40-806 MHz) and provides 8 outputs. The advanced circuit design incorporates a pin diode matrix to route any of the inputs to any of the outputs by utilizing the 13-14V Right-Circular/Vertical or 17-18V Left-Circular/Horizontal switching control supplied by the satellite receivers, thus eliminating digital artifacts that result from mechanical relay switching. To compensate for insertion loss, both versions use separate built-in amplifiers for satellite and/or VHF/UHF signals. The TSMS-2150X series, used with the external power supply, will supply power to the LNBs reducing heat build up within the multiswitch and prolong the life of the unit..
Features:
- Wide Frequency Range (TSMS2150-16A 950-2150MHz; TSMS2150-8AUV 40-2150MHz)
- Simple Interface Design Provides 2 Satellite Polarity Inputs and 8 or 16 Outputs, For Quick Installation
- All Rear Panel Connection Access Allows Rack or Wall Mount Flexibility
- PIN Diode Matrix Reduces Polarity Transfer Time and Digital Artifacts Providing Consistent Picture quality
- Polarity is Selected by Receiver Supplied Voltage (14V/18VDC) Compatible with Most DTH Satellite Services
- Antenna Signal Combines with Satellite on Output Eliminating External Combining, Reducing Cost and Clutter
- 500 mA Voltage Power Pass Through Reduces Cost by Providing Satellite Receiver Path for LNB Power
- Built-in Amplifier Compensates for Insertion Losses Reducing Need of External Amplification
- External UL Approved Power Supply Reduces Heat Buildup Thus Increasing Unit Life
